The Ionizer Plus™
Front Panel Details

[Ionizer Plus front panel diagram]
  1. FILTRATED VOLUME indicator
    • Indicates the amount of water that has flowed through the cartridge.
    • The U-CHANGE indicator will light to indicate that the life span of the UV lamp has been reached.

  2. Mode indicators
    Lights to indicate the type of water being output from the alkaline ionized water outlet (alkaline ionized water, astringent water, purified water).

  3. STRONG electrolysis indicator
    Lights when strong electrolysis has been selected

  4. POWER indicator
    Lights when power is supplied to the unit.

  5. CLEANING indicator
    Microprocessor controlled self-cleaning for maintenance-free use. Flashes to give you advance notice of cleaning. Lights during cleaning. A melody is also played at this time.

  6. Filter cartridge REPLACE indicator
    Lights to indicate that the filter cartridge should be replaced.

  7. OVERLOAD warning indicator
    Flashes when the internal mechanism temperature rises above the allowed temperature due to a long period of use

  8. MODE SELECT button
    To switch the alkaline ionized water outlet for output of other types of water. Displays type of water being output to the stainless steel flexible hose: alkaline, astringent, or purified.

  9. UV lamp viewing window
    This window can be used to confirm that the ultraviolet lamp is lit (irradiation system operation).

  10. Level indicators
    Light to indicate the pH level.

  11. pH ADJUSTMENT button
    • To select the 1 to 3 pH level or strong electrolysis setting
    • When pressed for more than 3 seconds, the mode will be switched to manual cleaning.

  12. UV START UP button UV START UP indicator
    When the UV START UP button is pressed, the indicator will light indicating ultraviolet system operation

  13. ELECTROLYSIS indicator
    Lights when alkaline ionized water or astringent water is being produced.

  14. Cartridge setting switch
    For selection of 10,000 liters or 6,000 liters setting depending on the filter cartridge being used.

  15. Filter reset button
    Used when replacing the filter cartridge.